Menu
Your Cart
Due to currency fluctuations against the dollar, the prices of some products may vary, you will be informed about any such price variations during our order-confirmation call — Or Call Us for updated prices 0305-5541115 —

BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone

BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
BOYA BY-BM3032 Camera-Mount Supercardioid Shotgun Microphone
  • Availability: In Stock
Rs.30,000.00
Ex Tax: Rs.30,000.00

Features

  • For DSLR/Mirrorless Cameras, Camcorders
  • Lightweight ABS Plastic Construction
  • Integrated Shockmount, High-Pass Filter
  • 3-Level Volume Control
  • Right-Channel Lower Safety Track Option
  • Runs for 30 Hours on 2 x AAA Batteries
  • Foam and Furry Windscreens

BOYA BY-BM3032 Supercardioid Camera-Mount Shotgun Microphone is a lightweight, compact condenser microphone designed to deliver improved sound quality for YouTube clips, interviews, vlogs, and other video applications with DSLR and mirrorless cameras.

The mic is constructed from ABS plastic and features an integrated shockmount to absorb noise-causing vibrations. The shockmount attaches directly to your camera's shoe mount and also features a 1/4-20 thread on the bottom to accommodate tripods and other mounting options. Two AA batteries power the mic for up to 30 hours.

The BY-BM3032 features a supercardioid polar pattern that focuses audio capture tightly in front of the microphone, picking up substantially less background sound than the omnidirectional mic built into the camera. The mic offers three gain settings (-10, 0, and +20 dB) so you can set the proper level for your camera model without overloading the input or sending too little signal and getting a lot of camera hiss. You also have the option to record the right channel at a -10 dB lower volume as a safety—in case the level in the main track clips.

The high-pass filter with two frequency settings allows you to filter out unwanted bottom end from air conditioning units and other low-frequency disruptors. Conversely, the +5 dB high-frequency boost option brightens the sound to compensate for upper frequencies lost when shooting outside with the supplied furry windscreen. A foam windscreen is also included for indoor recording. The BY-BM3032 has an attached 3.5mm TRS cable to connect to cameras, camcorders, and audio recorders.

  • ABS plastic construction
  • Shockmount absorbs vibrations and attaches to camera shoe, features 1/4-20 thread
  • Operates for up to 30 hours on two AA batteries
  • Supercardioid pickup pattern substantially reduces background sound
  • Three-setting gain control lets you set correct level for camera
  • High-pass filter with two frequency settings reduces low-end rumble
  • +5 dB high-end boost option compensates for loss when using furry windshield
  • Foam windshield and furry windshield included
Connectivity
Output Connectors (Analog)1 x 1/8" / 3.5 mm TRS (on Attached Cable)
Microphone
CapsuleCondenser
Form FactorCamera-Mount
Gain Adjustment-10 dB Up to +20 dB
High-Pass Filter75 Hz 150 Hz
On-Board ControlsGain/Sensitivity, High-Pass Filter, HF, On/Off
Operating PrincipleLine Gradient
OrientationEnd Address
Pad-10 dB
Polar PatternSupercardioid
Sound FieldMono
WindscreenFoam, Windsock/Windjammer (Included)
Performance
Frequency Range20 Hz to 20 kHz
Impedance200 Ohms
Sensitivity-30 dB (1 kHz)
Power
Operating Voltage3 V (Battery Power)

Write a review

Please login or register to review